Awesome DIY Wooden Latern Tutorials

Awesome DIY Wooden Latern Tutorials Apk

<100| 6.17MB|
  | Free
Awesome DIY Wooden Latern TutorialsAwesome DIY Wooden Latern TutorialsAwesome DIY Wooden Latern TutorialsAwesome DIY Wooden Latern TutorialsAwesome DIY Wooden Latern Tutorials

Description

Make a wooden lantern for deck or patio. The design used to make the wooden lanterns is a simple one, and I used scrap pieces of pine that I had left over from previous projects. While I used a Kreg Pockethole Jig to join all the pieces, waterproof glue works just as well for the smaller ones.

Step 1: Prepare the Sections for Assembly

1. Start by cutting all the sections that you need to assemble your wooden lantern. Lightly sand the edges once cut. I used the following sizes:

Large lantern:

2 of 250 x 250mm pine | 130 x 130mm pine | 70 x 70mm pine - top/base

4 of 32 x 32 x 400mm pine - uprights

4 of 32 x 32 x 30mm pine - feet

8 of 44 x 180mm pine - cross pieces

Medium lantern:

2 of 200 x 200mm pine | 100 x 100mm pine | 60 x 60mm pine - top/base

4 of 32 x 32 x 300mm pine - uprights

4 of 32 x 32 x 30mm pine - feet

8 of 44 x 120mm pine - cross pieces

Small lantern:

2 of 160 x 160mm pine | 80 x 80mm pine | 50 x 50mm pine - top/base

4 of 32 x 32 x 200mm pine - uprights

4 of 32 x 32 x 30mm pine - feet

8 of 44 x 80mm pine - cross pieces

2. If you are using a router to add a decorative edge to the top and base sections, do this now. If you don't have a router and are adding pine moulding for the decorative edge, attach this once the lantern is assembled. I have a fantastic Triton router and router table that is super-easy to use and I love adding finishing touches to all my decor projects.

GOOD TO KNOW: In the instructions below I stained the pine sections and moulding strips (for the medium lantern) after assembly, but in hindsight it is far better to use Wood Stain before you assemble.

3. For the large lantern I joined the cross sections to the uprights with pockethole screws. However, it is important to note that you can use wood glue for the medium and small lantern. Clamp the glued sections overnight.

Step 2: Assemble

4. All the cross sections are joined to the uprights with wood glue and pockethole screws. Make a front and back frame in this way, as shown.

5. With the front and back frames assembled, you can add the side cross pieces in the same way.

6. It was difficult to get my drill / driver into the frames to drive in the last screw, so I used my Bosch PSR cordless screwdriver. If you don't have a cordless screwdriver you can use a manual screwdriver.

7. Assemble the top as desired. I added a pine knob to the large lantern. The sections were screwed and glued together.

Step 3: Finish

8. As mentioned above, it is better to stain the individual pieces before assembly. I stained and sealed everything after assembly using Wood Stain and Sealer. Each lantern was stained in a different tint: Large lantern - Antique Oak | Medium lantern - Imbuia | Small lantern - Cherrywood.

9. Once complete, pop into your local glass supplier and have glass cut to fit the panels. Secure the glass pane at the top and bottom with Sealer.

Want to know more ?
Download this application now and get what you want here. worth to try and you will like it.
simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.

Addtional Information

  • Total Downloads

    <100

  • Latest Version

    1.0

  • Updated

    2017-08-26

  • Category

    Personalization

  • Requires Version

    14

  • Package name

    com.amazingideas.awesomediywoodenlaterntutorials

  • Md5

    e97c593fe1bbfb8ef2eb5be99da4801e

  • Developer

    Amazing Ideas

Previous Versions

How to install Awesome DIY Wooden Latern Tutorials APK?

1. Check the Android version to verify compatibility of Awesome DIY Wooden Latern Tutorials APK with your smart phone;Find Android version: go to "Settings" - "About the phone" - "Android version". Make sure Awesome DIY Wooden Latern Tutorials is compatible with your Android phone.
2. Click the download button to download Awesome DIY Wooden Latern Tutorials.Once the download completed,find Awesome DIY Wooden Latern Tutorials in your download folder or notification center and tap the icon to install the APK.
3. Find Awesome DIY Wooden Latern Tutorials icon in your home screen then tap the icon to open it.